Products Applications Why Litenza Blog About Service Contact
Litenza LI-S3 flashlight, spotlight/floodlight combo and red/blue warning torch
LI-S3 · FLASH LIGHT

Spotlight, floodlight, and warning beacon in one.

A compact, rechargeable handheld flashlight combining a focused spotlight and a wide floodlight in one pocket-sized package, with a magnetic base and dual-color red/blue warning output.

500 lmMax Floodlight
190 gWeight
IP66Waterproof

What Is the LI-S3?

The LI-S3 is a compact, rechargeable handheld light combining a focused spotlight and a wide floodlight in one pocket-sized unit, with a magnetic base for hands-free attachment and dual-color red/blue warning output for hazard marking. It's the unit built to go wherever a person goes, rather than a fixed or mast-mounted light for an area.

Key Specifications

Primary Output

Two independently switchable light sources: a spotlight (3W max, 400lm max, 160m lighting distance) and a floodlight (6W max, 500lm max). Modes include High Output, Low Output, Flash, and SOS, plus floodlight-specific modes: standard, stepless dimming, yellow, red/blue, and red+blue flash. A memory mode recalls the last-used setting, and a power indicator shows remaining charge.

Battery & Power System

Built-in 3.7V 2000mAh rechargeable battery, charged via a built-in port. Can also be used as an emergency power source for other small devices.

Runtime

Spotlight: 5 hours max setting, 50 hours lowest setting. Floodlight: 4–60 hours depending on mode and brightness.

Charging

2-hour charge time via the built-in charging port.

Physical Configuration & Mounting

190g, 200 x 41.5 x 39mm. A magnetic adsorption base allows hands-free attachment to any iron or metal surface, and the unit is small enough to clip onto a belt or vest.

Weather & Environmental Performance

IP66 rated per IEC 60529 — fully dust-tight and protected against powerful water jets — with an anti-impact housing.

Deployment & Portability

At 190g, this is the most portable unit in the range — carried on the person rather than set up on-site, ready the moment it's needed.

Technical Specifications

SpecificationSpotlightFloodlight
Wattage (Max)3W6W
Brightness (Max)400 lm500 lm
Lighting Distance160 m
Battery Duration5h (Max) / 50h (Lowest)4h – 60h
Battery Capacity3.7V 2000mAh
Charge Time2 hours
IP GradeIP66
Weight / Size190 g · 200 x 41.5 x 39 mm
ApplicationsEmergency response, vehicle maintenance, camping, roadside/traffic warning, search operations
Warranty1 year manufacturer warranty; extended coverage available at purchase

Source: Litenza LI-S3 product specification sheet. Specifications subject to change without notice. Want the full PDF datasheet? Request It and we'll email it to you.

Applications

The LI-S3's compact size and magnetic mount make it the unit crews actually carry on them.

  • Emergency response & search operations — see our Disaster Response guide
  • Vehicle maintenance — close-range inspection and repair work
  • Roadside & traffic warning — red/blue warning modes for hazard marking
  • Camping & outdoor use — general-purpose portable lighting

Read our Rescue Operation Lighting Requirements guide and our Handheld Lighting guide for more on this use case.

LI-S3 vs a Standard Handheld Torch

FactorLI-S3Standard Single-Mode Torch
PerformanceDual spotlight/floodlight, multiple modes incl. warningUsually one fixed beam type, no warning modes
Power sourceBuilt-in rechargeable batteryOften disposable batteries
Fuel requirementNoneNone (battery-powered), but ongoing battery purchases if disposable
NoiseSilentSilent
EmissionsNoneNone
DeploymentMagnetic hands-free mountUsually held, no mounting option
MaintenanceRecharge via built-in portPeriodic battery replacement
Operating costElectricity onlyRecurring disposable battery cost

Comparison reflects general characteristics of a standard single-mode handheld torch as an equipment category, not a specific competitor product.

Safety, Noise & Emissions

Battery operation means no emissions and silent use. The magnetic hands-free mount frees both hands for the actual task rather than holding a light throughout, and the red/blue warning modes give roadside and hazard-marking use a dedicated, distinct-from-white-light visibility signal. IP66-rated, anti-impact housing holds up to field handling and weather exposure. See our guide to IP ratings and industrial lighting standards for what IP66 covers.

Common Questions

What modes does the LI-S3 have?

Spotlight, floodlight, and red/blue warning modes for hazard marking.

How is the LI-S3 mounted?

A magnetic base for hands-free use on any iron or metal surface.

What is the LI-S3's IP rating and weight?

IP66, and just 190 grams.

How long does the LI-S3 run on a charge?

Up to 50–60 hours on its lowest setting, with a 2-hour charge time.

Which Litenza Light Is Right for You?

ModelBest ForMax OutputWeightPower
LI-300Compact sites, frequent relocation14,000 lm8.2 kgBattery / AC
LI-500Maximum output, wide-area coverage65,000 lm (AC)50kg-classBattery / AC
LI-TP-200Precision aiming, confined spaces12,000 lm4.4 kgBattery
LI-TC-300Powering cameras, sensors & field gear40W output8.4 kgBattery
LI-S3 (this page)Handheld work, close-range & hazard warning500 lm190 gBattery
LI-2Hands-free work, both hands needed320 lm80 gBattery

The LI-S3 is a good fit if:

  • You need a handheld unit for close-range work or hazard marking
  • You want something that clips to a belt or vest and goes wherever the crew goes
  • You need red/blue warning modes for roadside or hazard signalling

Consider a different model if:

  • Lighting a wider area or a fixed position — the LI-300 covers more ground
  • Remote-aimed lighting instead of a handheld — the LI-TP-200 does that

Complete the Range

Ready to order the LI-S3?

Request a Quote → WhatsApp about LI-S3 →