Products Applications Why Litenza Blog About Service Contact
Litenza LI-300 portable tripod light, deployed and folded
LI-300 · PORTABLE TRIPOD LIGHT

Deployable lighting in one bespoke, robust package.

A compact, single-person operated portable tripod light for rapid deployment across construction, emergency response, sport, maintenance, infrastructure, mining and railway applications.

14,000 lmMax Output
8.2 kgWeight (excl. battery)
IP66Weatherproof

What Is the LI-300?

The LI-300 is a single-person operated portable tripod light, built around a telescopic pole that extends from 1.25m to 3.1m in two steps, under 10 seconds, with no tools or motor required. It's designed for sites where lighting has to move as often as the work does — the tripod legs release and lock with a single click, and the whole unit folds compact enough to carry between positions without help.

Key Specifications

Primary Output

Up to 14,000 lumens, stepless dimmable via the rainproof driver port — output scales continuously from off to maximum rather than jumping between fixed steps.

Battery & Power System

Runs on LI-24-series lithium battery packs, with a compartment fitting two replaceable packs, or AC 100–277V mains power where grid access is available. Dual rainproof USB outputs (5V/2A) let the unit charge two other devices at once, and a built-in phone stand hook keeps a phone usable hands-free while charging on site.

Runtime

Over 13 hours 10 minutes in Standard mode on two LI-24-100 packs, extending to 71+ hours in Eco mode. With the smaller LI-24-54 pack option, Eco mode runtime is 36+ hours — a lighter, shorter-runtime alternative when carry weight matters more than maximum duration.

Charging

Battery packs charge via the included LI-MC-2 charger. The unit's own USB outputs are for charging other devices from the light's battery, not for charging the light itself.

Mast Height & Physical Configuration

Extends from 1.25m to 3.1m, secured at any height in between with a buckle clamp on the telescopic pole. Dual lamp heads articulate independently for flexible beam direction, and an ultra-low center of gravity with extended tripod legs keeps the unit stable on slopes and in wind. Optional ground pegs add further wind and vibration resistance.

Weather & Environmental Performance

IP66 rated per IEC 60529 — fully dust-tight and protected against powerful water jets from any direction. Operating temperature range is -10°C to 50°C.

Deployment & Portability

8.2kg (fitting only, excluding battery). One person expands or retracts the unit in two steps, completed in 10 seconds, with one-click release or lock on the tripod legs — no second operator or tools needed.

Technical Specifications

SpecificationLI-300
Height (Retracted – Extended)1.25 m – 3.1 m
Weight (fitting only, excl. battery)8.2 kg
Power SupplyLI-24-100 series battery pack / AC 100–277V
LumensUp to 14,000 lm (stepless dimmable)
Run Time (Standard mode, 2x LI-24-100)>13h 10min
Run Time (Eco mode, 2x LI-24-100)71+ hours
Run Time (Eco mode, 2x LI-24-54)36+ hours
IP GradeIP66
USB Output5V / 2A (dual rainproof outputs)
Operating Temperature-10°C to 50°C
ApplicationsConstruction, emergency response, sport, maintenance, infrastructure, outdoor events, mining, railway
Warranty1 year manufacturer warranty; extended coverage available at purchase

Source: Litenza LI-300 product specification sheet. Specifications subject to change without notice. Want the full PDF datasheet? Request It and we'll email it to you.

Dimensions

DimensionValue
Extended Height3100 mm
Retracted Height1250 mm
Footprint (legs deployed)1051 mm
Retracted Width258 mm
Retracted Depth198 mm
Base Height (retracted)261 mm

Standard Kit

LI-300 portable tripod light

LI-300 Tripod Light

LI-24-100 lithium battery pack

LI-24-100 Battery Pack

LI-MC-2 charger

LI-MC-2 Charger

Applications

The LI-300's compact folded size and sub-10-second setup make it the go-to choice on sites where lighting has to move as often as the work does.

Read our Industrial Site Lighting Checklist for a practical pre-shift walkthrough.

LI-300 vs a Traditional Generator-Powered Work Light

FactorLI-300Generator-Powered Alternative
Power sourceLithium battery pack, or AC mainsOnboard fuel-powered generator
Fuel requirementNoneDiesel or petrol supply chain on-site
NoiseSilent operationContinuous engine noise
EmissionsNone at point of useEngine exhaust
DeploymentSingle person, under 10 secondsTypically two-person, engine start required
MaintenanceNo engine servicingRegular engine and fuel-system servicing
Operating costNo fuel cost; battery/electricity onlyOngoing fuel cost plus engine maintenance

Comparison reflects general characteristics of fuel-generator-powered work lights as an equipment category, not a specific competitor product.

Safety, Noise & Emissions

Battery and AC-mains operation means the LI-300 produces no exhaust emissions and no fuel-handling risk at the point of use, unlike a generator-powered light. It runs silently, which matters on noise-sensitive sites and residential-adjacent work. IP66 sealing protects the electrical system from dust and water ingress rather than relying on an open engine bay. See our guide to IP ratings and industrial lighting standards for what IP66 covers.

Common Questions

How fast can the LI-300 be deployed?

Under 10 seconds. It extends from 1.25m to 3.1m in two steps, with one-click release or lock on the tripod legs.

What is the LI-300's IP rating?

IP66 — rated for dust and water exposure on active job sites.

How long does the LI-300 run on a charge?

Over 13 hours 10 minutes in standard mode on two LI-24-100 packs, extending to 71+ hours in Eco mode.

What's included in the standard LI-300 kit?

One LI-300 Tripod Light, two LI-24-100 Battery Packs, and one LI-MC-2 Charger.

Which Litenza Light Is Right for You?

ModelBest ForMax OutputWeightPower
LI-300 (this page)Compact sites, frequent relocation14,000 lm8.2 kgBattery / AC
LI-500Maximum output, wide-area coverage65,000 lm (AC)50kg-classBattery / AC
LI-TP-200Precision aiming, confined spaces12,000 lm4.4 kgBattery
LI-TC-300Powering cameras, sensors & field gear40W output8.4 kgBattery
LI-S3Handheld work, close-range & hazard warning500 lm190 gBattery
LI-2Hands-free work, both hands needed320 lm80 gBattery

The LI-300 is a good fit if:

  • You need to reposition lighting multiple times per shift
  • One person needs to deploy and carry it without help
  • Your site doesn't have, or doesn't need, mains power access
  • 14,000 lumens covers your working area

Consider a different model if:

  • Wider-area coverage or AC-mains power — the LI-500 delivers up to 65,000 lumens and accepts an AC driver
  • Remote re-aiming without repositioning the unit — the LI-TP-200's motorized pan-tilt head does that
  • Powering cameras or sensors rather than lighting the area — the LI-TC-300 is a power platform, not a light

Complete the Range

Ready to spec the LI-300 for your site?

Request a Quote → WhatsApp about LI-300 →